|
|
 |
|
|
PV Carbon Steel |
|
|
|
 |
| |
| General |
| |
| Self contained hopper |
| Spreads free flowing materials - sand and/or salt |
| Spread width 4 to 30 feet |
|
| |
| Hopper |
| |
| 12-gauge one-piece sides with double staff has an integral history of various crimped top edge |
| Four 12-gauge body jacks |
| 14-gauge one-piece ends with double crimped top edge |
| 45 degree sloped side walls for free flow of material to conveyor |
| Locking adjustable rear feedgate provides 4-1/2" x 9" opening |
|
| |
| Conveyor |
| |
| 16" overall width conveyor designed to patented items for the spreader protect chain links |
| Replaceable Chain Shields |
| 10-gauge steel floor flat design |
| 12,500 lb. tensile strength self-cleaning pintle with hardened steel pins |
| Chain width 14.5" x 1/4" x 1' crossbars |
| Conveyor driven by 20:1 ratio worm gearbox mounted on tapered bearings |
| 3" adjustment for chain take up |
| Chain driven by two 6-tooth sprockets keyed to 1-1/4” drive shaft |
| 1-1/4" idler shaft with 6-tooth sprockets |
| Self-aligning bronze bearings on idler shaft |
| Inverted Vee |
| Top Screens |
| |
| Spinner Assembly |
| |
| Spinner hopper has two adjustable internal baffles |
| 10-gauge spinner disc with 4 vanes |
| 4 overlapping external baffles (3 adjustable) |
| 12-gauge spinner chute |
|
|
| |
| 1" spinner drive shaft supported by re-lubeable ball bearings |
| |
| Powder Coat |
| |
| Shot blasting of unit to remove all millscale and foreign material |
| Surface is chemically cleaned by high pressure spray system |
| Proper procedure for powder coat baking and curing is then followed |
| The standard powder coat color is either Omaha orange or safety yellow |
|
| |
| Power Source |
| |
| Engine Drive (ES) |
| 10.5 hp 4 cycle Briggs and Stratton engine |
| Syncro balanced with electric starter |
| Electric clutch with 90 ft lbs of torque |
| In cab start, stop, and throttle controls |
| Electric throttle |
| Battery cables and hold downs (battery not included) |
| Enclosed engine hood hinged to hopper |
|
| Hydraulic Drive (H) |
| Low speed high torque motors to drive conveyor and spinner |
| Motor direct coupled to gearbox |
| Gearbox sprocket drives the spinner through roller chain |
| |
| Optional Equipment |
| |
| 12" spinner extension |
| Stainless steel |
| Nylon strap mounting kit |
| Flow valve & stand |
| Additional 6" box extension |
| Hydraulic hoses & pumps |
| Various reservoirs |
| Special paint |
| Honda engine |
| Tarp kit |
| Liquid Spray System |
| Remote battery connection harness | |
|
|
|
|
